Department  of Materials Science  and Engineering   
School of Engineering  and Material Science

 

 

 

 

  SELECTED@PUBLICATIONS

1.                 Y. Watanabe, N. Kitazawa, Y. Nakamura, C. Li, T. Sekino and K. Niihara, "Mechanical Properties and Residual Stress in AlN Films Prepared by Ion-Beam Assisted Deposition", Journal of Vacuum Science and Technologies A, vol.18 (2000.7/8) pp.1567-1570.

2.                 Y. Watanabe, S. Ohnita, N. Kitazawa, and Y. Nakamura, gEffect of Argon Addition on Nitrogen Containing Carbon Films Prepared by Hot Carbon Filament CVDh, Materials Research Society Symposium Proceedings, vol.@593 (2000) pp.421-425.

 

3.                 Y. Watanabe, Y. Hara, T. Tokuda, N. Kitazawa and Y. Nakamura, g Surface Oxidation of Aluminum Nitride Thin Filmsh, Surface Engineering, vol. 16 (2000) pp. 211-214

 

4.                 S. Miyabe, T. Okawa, N. Kitazawa, Y. Watanabe and Y. Nakamura, g Mechanical Properties of AlN Thin Films Prepared by Ion Beam Assisted Depositionh, Materials Research Society Symposium Proceedings, vol. 647 (2001)@ pp. O11.10.1-O11.10.5.

5.                 Y. Watanabe, M. Aono, A. Yamazaki, N. Kitazawa and Y. Nakamura, gEffects of Argon Addition on a-CNx Film Deposition by Hot Carbon Filament Chemical Vapor Depositionh, Journal of Vacuum Science and Technologies A, vol. 20 (2002.7/8) pp.1242-1246.

6.                 Y. Nasu, M. Aono, S. Aizawa, N. Kitazawa and Y. Watanabe, gEffects of Irradiation by Low Energy Nitrogen Ions on Carbon Nitride Thin Filmsh, Materials Research Society Symposium Proceedings, vol. 750 (2003.4) pp. 349-354.

7.                 S.Aizawa, M. Aono, N. Kitazawa, Y. Watanabe, O. Shimizu and Y. Suda, gEffects of Graphite Content on Carbon Nitride Films Prepared by Hot Carbon Filament CVDh, Journal of Vacuum Science and Technologies A, vol. 21 (2003.7/8) pp.1386-1388.

8.                 C. Iwasaki, M. Aono, N. Kitazawa and Y. Watanabe, gEffect of Nitrogen Iom Beam Irradiation on Amorphous Carbonh, Materials Processing for Properties and Performance, vol.2 (2004.5) pp. 494-502.