| Journal Publication and Proceedings of International Conference | ||||||
| Journal Publication | ||||||
| Author | Co-author | Title | Journal | Pages | Y. M | |
| N. Ogasawara | Y. Kimura | Simple Method for Spectral Evaluation of Radiant Energy Emitted from Far Infrared Heaters | Heat Transfer—Asian Research, Vol.42, Issue 3 | 259-273 | 2013.05 | |
| H．Yamada | N.
Ogasawara, Y. Shimizu, K. Horikawa, H. Kobayashi, X. Chen |
Effect of High Strain Rate on Indentation in Pure Aluminum | Transactions of the ASME Journal of Engineering Materials and Technology, Vol.135, Issue 2 | 1-5 | 2013.04 | |
| H. Yamada | N. Ogasawara | Effect of Rib Shape and Deformation Rate on Compressive Deformation Behavior in Expand Polymer Rib Structures | Journal of the Japanese Society for Experimental Mechanics | 171-181 | 2012.09 | |
| N. Ogasawara | N.
Chiba, X. Chen |
Indentation
Hardness of Film/Substrate System: Discovery of the Unconventional Overshoot and Undershoot Behaviors |
Journal of Solid Mechanics and Materials Engineering, 6 | 814-831 | 2012.07 | |
| 山田 浩之 | 清水 陽子， 小笠原 永久， X. Chen |
鋭い圧子押込で得られる荷重変位関係に及ぼすひずみ速度の影響 | 実験力学，Vol.12，No.2 | 88-93 | 2012.06 | |
| 小笠原 永久 | 千葉 矩正， 山田 浩之， X. Chen |
鋭い圧子押込みにおける負荷除荷曲線を利用した 薄膜材料の弾塑性特性評価 |
実験力学，Vol.12，No.1 | 26-32 | 2012.03 | |
| 小川 裕司 | 宇根 篤暢， 小笠原 永久， 吉冨 健一郎， 餅田 正秋 |
無変形冷凍ピンチャックの開発（第1報）−冷凍液特性に基づく冷凍ピンチャックの設計− | 精密工学会誌，第77巻，第8号 | 771-775 | 2011.08 | |
| 山田 浩之 | 堀川 敬太郎， 松本 武史， 小林 秀敏， 小笠原 永久 |
6061および7075アルミニウム合金の引張変形過程における水素放出挙動 | 軽金属，第61巻，第7号 | 297-302 | 2011.07 | |
| 小笠原 永久 | 木村 嘉孝 | 遠赤外線ヒータの分光放射特性の簡易評価方法 | 日本機械学会論文集B編，第77巻，第776号 | 1147-1157 | 2011.04 | |
| N. Ogasawara | M. Ito, N. Chiba |
Nondestructive Inspection of Local Thinning by Infrared Thermography with Stainless Steel Film Heater | Journal of the Japanese Society for Experimental Mechanics, 10 | 129-134 | 2010.10 | |
| 小笠原 永久 | 中村 元， 伊東 将典 |
ステンレス薄膜加熱赤外線サーモグラフィ法による減肉欠陥同定 | 防衛大学校理工学研究報告，第48巻，第1号 | 121-128 | 2010.09 | |
| 小笠原 永久 | X. Chen | 鋭い圧子押込みにおける負荷除荷曲線を利用した薄膜材料の弾塑性特性評価 | 防衛大学校理工学研究報告，第48巻，第1号 | 129-136 | 2010.09 | |
| N. Ogasawara | N. Chiba, E. Kobayashi, Y. Kikuchi |
Crushing Strength of Aluminum Honeycomb with Thinning Cell Wall | Journal of Solid Mechanics and Materials Engineering, 4 | 1338-1345 | 2010.08 | |
| A. Une | K. Yoshitomi, M. Mochida, N. Ogasawara |
Influence of Pin Chuck Ring Seals and Polishing Steps on Wafer Flatness | Microelectronic Engineering, 87, 5-8 | 1646-1649 | 2010.08 | |
| N. Ogasawara | N. Chiba, X. Chen |
A Simple Framework of Spherical Indentation for Measuring Elastoplastic Properties | Mechanics of Materials, 41 | 1025-1033 | 2009.09 | |
| A. Une | N. Ogasawara, T. Fukuda, M. Yoshise, P. Xin |
Influence of a Lift Hole-Equipped Pin Chuck on Wafer Flatness | Microelectronic Engineering, 86, 4-6 | 517-520 | 2009.06 | |
| L. Liu | N. Ogasawara, N. Chiba, X. Chen |
Can Indentation Technique Measure Unique Elastoplastic Properties? | Journal of Materials Research, 24 | 784-800 | 2009.03 | |
| 小笠原 永久 | 千葉 矩正 別府 万寿博 河島 庸一 小林 英治 菊地 祐仁 |
減肉ハニカム材料の衝撃圧潰荷重式の提案 | 日本機械学会論文集A編，第74巻，第746号 | 1314-1320 | 2008.10 | |
| M. Zhao | Y. Xiang, J. Xu, N. Ogasawara, N. Chiba, X. Chen |
Determining Mechanical Properties of Thin Films from the Loading Curve of Nanoindentation Testing | Thin Solid Films, 516 | 7571-7580 | 2008.09 | |
| Y. Tang | A. Yonezu,
N. Ogasawara, N. Chiba, X. Chen |
On Radial Crack and Half-Penny Crack Induced by Vickers Indentation | Proceedings of the Royal Society A, 464 | 2967-2984 | 2008.06 | |
| N. Ogasawara | N. Chiba, X. Chen |
Analysis of Microindentation Unloading Curves based on Representative Strain Approach with Closed-Form Applications | Journal of Solid Mechanics and Materials Engineering, 2 | 604-615 | 2008.05 | |
| A. C. Razvan | 小笠原永久， 千葉矩正， X. Chen |
円錐圧子押込における基板効果を利用した薄膜材料の塑性特性同定法 | 日本機械学会論文集A編，第74巻，第740号 | 499-505 | 2008.04 | |
| N. Ogasawara | M. Zhao, N. Chiba, X. Chen |
Comments on "Extracting the plastic properties of metal materials from microindentation tests: Experimental comparison of recently published methods" by B. Guelorget et al. [J. Mater. Res. 22, 1512, (2007)]: The Correct Methods of Analyzing Experimental Data and Reverse Analysis of Indentation Tests | Journal of Materials Research, 23 | 598-608 | 2008.03 | |
| M. Zhao | X. Chen, Y. Xiang, J. J. Vlassak, D. Lee, N. Ogasawara, N. Chiba, Y. X. Gan |
Measuring Elastoplastic Properties of Thin Films on an Elastic Substrate Using Sharp Indentation | Acta Materialia, 55 | 6260-6274 | 2007.10 | |
| X. Chen | N. Ogasawara,
M. Zhao, N. Chiba |
On the Uniqueness of Measuring Elastoplastic Properties from Indentation: the Indistinguishable Mystical Materials | Journal of the Mechanics and Physics of Solids, 55 | 1618-1660 | 2007.08 | |
| N. Ogasawara | N. Chiba, M. Zhao, X. Chen |
Measuring Material Plastic Properties with Optimized Representative Strain-Based Indentation Technique | Journal of Solid Mechanics and Materials Engineering, 1 | 895-906 | 2007.07 | |
| N. Ogasawara | N. Chiba, M. Zhao, X. Chen |
Comments on "Further Investigation on the Definition of the Representative Strain in Conical Indentation" by Y. Cao and N. Huber [J. Mater. Res. 21, 1810, (2006)]: A Systematic Study on Applying the Representative Strains to the Extract Plastic Properties through One Conical Indentation Test | Journal of Materials Research, 22 | 858-868 | 2007.04 | |
| M. Zhao | X. Chen, N. Ogasawara, A. C. Razvan, N. Chiba, D. Lee, Y. X. Gan |
New Sharp Indentation Method of Measuring the Elastic-Plastic Properties of Compliant and Soft Materials Using the Substrate Effect | Journal of Materials Research, 21 | 3134-3151 | 2006.12 | |
| N. Ogasawara | N. Chiba, X. Chen |
Limit Analysis-Based Approach to Determine the Material Plastic Properties with Conical Indentation | Journal of Materials Research, 21 | 947-957 | 2006.04 | |
| N. Ogasawara | N. Chiba,
X. Chen |
Erratum:"Representative Strain of Indentation Analysis" and "A Limit Analysis-Based Approach to Determine the Material Plastic Properties with Conical Indentation" | Journal of Materials Research, 21 | 2699-2700 | 2006.10 | |
| N. Ogasawara | N. Chiba, X. Chen |
Measuring the Plastic Properties of Bulk Materials by Single Indentation Test | Scripta Materialia, 54 | 65-70 | 2006.01 | |
| M. Zhao | N. Ogasawara, N. Chiba, X. Chen |
A New Approach to Measure the Elastic-plastic Properties of Bulk Materials with Spherical Indentation | Acta Materialia, 54 | 23-32 | 2006.01 | |
| M. Zhao | N. Ogasawara,
N. Chiba, X. Chen |
Corrigendum to: "A New Approach of Measuring the Elastic-plastic Properties of Bulk Materials with Spherical Indentation" | Acta Materialia, 56 | 675 | 2008.03 | |
| 小笠原永久 | 巻口和香子， 千葉矩正 |
弾性解と剛完全塑性解を利用した三角錐圧子押込みによる塑性特性評価法 | 日本機械学会論文集A編，第71巻，第710号 | 1406-1412 | 2005.10 | |
| N. Ogasawara | N. Chiba, X. Chen |
Representative Strain of Indentation Analysis | Journal of Materials Research, 20 | 2225-2234 | 2005.08 | |
| 小笠原永久 | 巻口和香子， 千葉矩正 |
複数の三角錐圧子押込みによるべき乗硬化材の塑性特性評価法 | 日本機械学会論文集A編，第70巻，第698号 | 1529-1534 | 2004.10 | |
| N. Chiba | Y. Ishida, N. Ogasawara, Hiroshi Ito |
Residual Stress of Thin-Wall Pipe Subjected to Axisymmetric Plastic Expansion | Transactions of the ASME Journal of Pressure Vessel Technology, 126 | 300-306 | 2004.08 | |
| 千葉矩正 | 石田有示， 小笠原永久，倉持知佳夫， 巻口和香子， |
微小押込み試験における誤差因子 −機械研磨により生じた加工硬化層の影響− |
防衛大学校理工学研究報告，第41巻，第1号 | 137-144 | 2003.09 | |
| 小笠原永久 | 倉持知佳夫， 巻口和香子， 千葉矩正 |
微小押込み試験に及ぼす加工変質層の影響 | 日本機械学会論文集A編，第69巻，第680号 | 805-811 | 2003.04 | |
| N. Ogasawara | M. Shiratori,
Q. Yu, T. Kurahara |
Estimation of Orthotropic Thermal Conductivity of Honeycomb Material | Heat Transfer Asian Research, 31 | 617-625 | 2002.12 | |
| 小川和洋 | 小笠原永久， 于強， 白鳥正樹， 鈴木孝司， 吉武明英 |
ハイドロフォーム部材の圧潰特性における加工の影響(第１報，準静的３点曲げにおける検討) | 日本機械学会論文集A編，第68巻，第669号 | 758-765 | 2002.05 | |
| 小川和洋 | 小笠原永久， 于強， 白鳥正樹， 鈴木孝司， 吉武明英 |
ハイドロフォーム部材の圧潰特性における加工の影響(第２報，準静的軸圧潰における検討と衝撃吸収部材の形状最適化) | 日本機械学会論文集A編，第68巻，第668号 | 580-587 | 2002.04 | |
| 白鳥正樹 | 矢倉武蔵， 小笠原永久， 中村いずみ， 大谷章仁 |
局所的減肉部を有する配管の耐震裕度評価に関する解析的研究 | 日本機械学会論文集A編，第67巻，第654号 | 209-215 | 2001.02 | |
| 小笠原永久 | 白鳥正樹， 于強， 藏原鉄二 |
ハニカム材料の直交異方性熱伝導率評価 | 日本機械学会論文集Ｂ2編，第65巻，第639号 | 3729-3733 | 1999.11 | |
| 小笠原永久 | 白鳥正樹， 于強， 藏原鉄二 |
簡易モデルを用いたハニカムサンドウィッチ構造材料の熱変形解析 | 日本機械学会論文集Ａ編，第65巻，第629号 | 127-132 | 1999.01 | |
| 小笠原永久 | 白鳥正樹， 于強， 宮野篤 |
簡易モデルを用いたハニカムサンドウィッチ構造材料の弾塑性解析 | 日本機械学会論文集Ａ編，第64巻，第624号 | 2059-2064 | 1998.08 | |
| N. Ogasawara | M. Shiratori, Q. Yu, A. Miyano |
Elastic-Plastic Analysis of Honeycomb Sandwich Panel by Using Honeycomb Element | JSME International Journal, A42 | 381-387 | 1999.07 | |
| 小笠原永久 | 白鳥正樹， 宮原進， 于強， 宮野進 |
ハニカム構造材料の衝撃吸収特性に関する研究（第２報，衝撃圧潰応力の評価） | 日本機械学会論文集Ａ編，第63巻，第616号 | 2575-2579 | 1997.12 | |
| 小笠原永久 | 白鳥正樹， 宮原進， 于強 |
ハニカム構造材料の衝撃吸収特性に関する研究（第１報，準静的状態における逐次座屈現象） | 日本機械学会論文集Ａ編，第63巻，第608号 | 774-779 | 1997.04 | |
| M. Shiratori | Q. Yu, Y. Takahashi, N. Ogasawara |
Application of Infrared Thermography to Detection of Flaws in Honeycomb Sandwich Constructions | JSME International Journal, A37 | 396-402 | 1994.10 | |
| Proceedings of International Conference | ||||||
| Author | Co-author | Title | Journal | Pages | Y. M | Place |
| K. Yoshitomi | A. Une, N. Ogasawara, M. Mochida, E. Yamamoto |
Fundamental Characteristics of a Water-Film Chuck | Proceedings of the 13th euspen International Conference | 30-34 | 2013.05 | Berlin, Germany |
| H. Yamada | M. Tsurudome, Y. Asano, N. Ogasawara, K. Horikawa |
Effect of Strain Rate Compressive Properties in P/M Al-Zn-Mg-Cu Alloy | Proceedings of 7th International Symposium on Advanced Science and Technology in Experimental Mechanics (7th ISEM '12-Taipei) | 1-4 | 2012.11 | Taipei, Taipei |
| H. Yamada | K. Horikawa, H. Kobayashi, K. Nishihara, N. Ogasawara |
Visualization of Hydrogen Evolution during Fatigue Deformation in 7075 Aluminum Alloy | Proceedings of 7th International Symposium on Advanced Science and Technology in Experimental Mechanics (7th ISEM '12-Taipei) | 1-5 | 2012.11 | Taipei, Taipei |
| H. Yamada | N. Ogasawara， Y. Shimizu, H. Horikawa, H. Kobayashi |
Effect of High Strain Rate on Micro-indentation Test in Pure Aluminum | Proceedings of 10th International DYMAT Conference | 01028, 1-5 | 2012.09 | Freiburg, Germany |
| H. Yamada | N. Ogasawara， T. Minagawa， S. Oka， Y. Kobayashi |
Compressive Deformation Behavior of Expanded Polymer Rib Structure | Proceedings of 6th International Symposium on Advanced Science and Technology in Experimental Mechanics (6th ISEM '11-Sendai/Kansai) | DVD028 | 2011.11 | Osaka, Japan |
| N. Ogasawara | H. Yamada | Thinning Identification Technique using Stainless Steel Film Heater and Response Surface Method | Proceedings of SPIE, Thermosense: Thermal Infrared Applications XXXIII | Vol. 8013, 1-9 | 2011.04 | Florida, USA |
| N. Ogasawara | M. Ito, N. Chiba |
Nondestructive inspection of local thinning by infrared thermography with SUS film heater | Proceedings of 4th International Symposium on Advanced Science and Technology in Experimental Mechanics (ISEM '09) | 40, 1-6 |
2009.11 | Niigata, Japan |
| N. Ogasawara | N. Chiba, E. Kobayashi, Y. Kikuchi |
Crushing Strength of Aluminum Honeycomb with Thinning Cell Wall | Proceedings of Asian Pacific Conference for Materials and Mechanics (APCMM2009) | 1-4 | 2009.11 | Yokohama, Japan |
| N. Chiba | N. Ogasawara, X. Chen |
Finite Element Study on Overshoot and Undershoot of Hardness in Film/Substrate Indentation | Proceedings of the 7th EUROMECH Solid Mechanics Conference | 359-360 | 2009.09 | Lisbon, Portugal |
| N. Chiba | N. Ogasawara, C. R. Anghel, X. Chen |
A Substrate Effect of Hardness in Film/Substrate Indentation: Finite Element Method on 'Overshoot' Phenomenon of Hardness | Proceedings of 36th of Solid Mechanics Conference | 226-227 | 2008.09 | Gdansk, Poland |
| X. Chen | N. Ogasawara, M. Zhao |
Can Nanoindentation Measure Unique Elastoplastic Properties? | 2007 MRS Fall Meeting | Symposium AA | 2007.11 | Boston, USA |
| N. Chiba | N. Ogasawara, X. Chen, Y. Ohori, K. Shirato |
Effect of Elastic Anisotropy of Substrates on Thin Film Indentation | APCOM’07 in conjunction with EPMESC XI | 1-7 | 2007.11 | Kyoto, Japan |
| X. Chen | N. Ogasawara, N. Chiba |
Determine Unique Material Elastoplastic Properties with Indentation | Proceedings of 31st International Cocoa Beach Conference and Exposition on Advanced Ceramics and Composites | 2007.01 | Florida, USA |
|
| N. Chiba | N. Ogasawara, C. R. Anghel, X. Chen |
Critical Penetration Depth for Nano/Micro Indentation Test to Determine Elastic-Plastic Film Properties Deposited on Hard Substrates | Proceedings of 8th Biennial ASME Conference on Engineering
Systems Design and Analysis (ESDA2006) |
ESDA2006-95143 1-8 |
2006.06 | Torino, Italy |
| N. Chiba | N. Ogasawara | Plastic Properties Identification with Plural Sharp Indenters | Proceedings of International Union of Theoretical and Applied Mechanics (IUTAM'04) | CD-SM18 L_10652 |
2004.08 | Warsaw, Poland |
| N. Ogasawara | C. Kuramochi, W. Makiguchi, N. Chiba |
Error Factors of Micro-Indentation Tests | Proceedings of International Conference on Advanced Technology in Experimental Mechanics (ATEM'03) | CD No.OS05 W0162 |
2003.09 | Nagoya, Japan |
| N. Chiba | N. Ogasawara， W. Makiguchi, Y. Yamamoto |
Computational Identification for Power-Law Hardening Material Constants by Means of Micro-Indentation and Similarity Functions | 2003 Mechanics and Materials Conference | 123 | 2003.06 | Arizona, USA |
| N. Chiba | Y. Ishida， N. Ogasawara， H. Ito， K. Enomoto, H. Kimoto |
Residual Stress of Thin-wall Pipe Subjected to Axisymmetric Plastic Expansion | Proceedings of ASME Pressure Vessels and Piping Conference (PVP'02) Vol. 440 | 213-220 | 2002.07 | Vancouver, Canada |
| N. Chiba | Y. Ishida, N. Ogasawara, H. Ito, K. Enomoto, H. Kimoto |
Residual Stress of Plastically Expanded Thin-Wall Pipe | Proceedings of the Romanian-Japanese Conference in Numerical Simulation in Engineering (NuSEng'01) | 85-96 | 2001.09 | Galati, Romania |
| K. Ogawa | N. Ogasawara, Q. Yu, M. Shiratori, K. Suzuki, A. Yoshitake |
Effect of Forming on the Crashworthiness of Hydroformed Member | Proceedings of the Numerical Methods in Industrial Forming Process (NuMIForm'01) | 951-956 | 2001.06 | Toyohashi, Japan |
| K. Ogawa | N. Ogasawara, Q. Yu, M. Shiratori, K. Suzuki, A. Yoshitake |
Effect of Hydro-Forming Process on Impact Absorption Member | Proceedings of the 5th International Joint Symposium on New Developments of Mechanical Engineering, Nagasaki, pp.175-178 (2000.8) | 175-178 | 2000.08 | Ioujima, Nagasaki |
| N. Ogasawara | M. Shiratori, J. Mochizuki |
Application of Infrared Thermography to Thermo Strength Related Problems | Proceedings of the Advanced Infrared Technology and Applications (5th AITA) | 368-378 | 1999.09 | Venetia, Italy |
| N. Ogasawara | M. Shiratori, Q. Yu, T. Kurahara |
Thermal Deformation Analysis of Honeycomb Sandwich Construction | Proceedings of the Joint Symposium Sister Universities in Mechanical Engineering | 57-60 | 1998.07 | Yeungnam Univ., Taegu, Korea |
| N. Ogasawara | M. Shiratori, S. Miyahara, Q. Yu, A. Miyano |
Modeling and Analyses of Honeycomb Buckling | Proceedings of the International Conference on Computational Engineering Science (ICES'97) | 91-96 | 1997.05 | San Jose, Costa Rica |
| N. Ogasawara | M. Shiratori | Application of Infrared Thermography to Fracture Mechanics | Proceedings of the SPIE Thermosense XIX | 201-212 | 1997.04 | Orlando, Florida, USA |
| N. Ogasawara | M. Shiratori, S. Miyahara, Q. Yu, A. Miyano |
Material Design and Strength Evaluation of Honeycomb Sandwich Structures | Proceedings of the Japan-Korea Joint Symposium on Advanced Technology and Science | 169-174 | 1996.10 | Yokohama, Japan |
| N. Ogasawara | M. Shiratori, S. Miyahara, Q. Yu, A. Miyano |
Modeling Analyses of a Honeycomb Sandwich Construction | Proceedings of the International Conference on Computational Engineering Science (ICES'95) | 2365-2370 | 1995.07 | Hawaii, USA |
| M. Shiratori | Q. Yu, Y. Takahashi, N. Ogasawara |
Detection of Flaws in Honeycomb Sandwich Constructions by Infrared Thermography | Proceedings of the Conference on Advanced Technology in Experimental Mechanics (ATEM'93) | 83-88 | 1993.08 | Kanazawa, Japan |